SATJEE ExamsAll chapters

Chemistry

Redox: JEE Main practice questions and key rules

Revise the main rules of Redox, study 3 worked questions, then test yourself with 10 fresh questions. Every question on SATJEE has full steps and the slip to avoid.

Open the revision cardsTake a chapter test

Key rules

  1. Recall the NCERT definitions and the rules for oxidation numbers.
    Watch out: Confusing the oxidising agent (which is reduced) with the species that is oxidised.
  2. Sum of oxidation states = charge on the species. H is +1 and O is −2 (usually).
    Watch out: Forgetting the overall charge on an ion, or forgetting there are 2 atoms of the metal.
  3. Σ(oxidation numbers) = charge. H is +1 (−1 in metal hydrides); O is −2 (−1 in peroxides, −½ in superoxides, positive with F); F is −1.
    Watch out: Using −2 for oxygen in peroxides, superoxides or OF₂, or +1 for hydrogen in metal hydrides.
  4. Higher E° (reduction) means stronger oxidising agent; lower E° means stronger reducing agent.
    Watch out: Picking the most negative value as the strongest oxidant.
  5. Redox needs a change in oxidation number. Precipitation, neutralisation, and hydration/decomposition of salts without element change are not redox.
    Watch out: Treating every decomposition or combination as redox (CaCO₃ → CaO + CO₂ is not).
  6. Reducing agent: the species that is oxidised (oxidation number increases). Oxidising agent: the species that is reduced.
    Watch out: Naming the product, or reversing the two roles.
  7. Disproportionation: the same species is both oxidised and reduced; its element sits in an intermediate oxidation state.
    Watch out: Choosing any redox reaction without checking that a single element moves both up and down.
  8. NCERT types: combination, decomposition, displacement (metal, non-metal or hydrogen) and disproportionation.
    Watch out: Calling a displacement reaction a combination because two reactants are written.

Worked questions

Question 1

What is the oxidation number of S in H₂SO₃? Use the NCERT rules for oxidation numbers.

  1. +3.5
  2. +3
  3. −4
  4. +4

Answer: D. +4

  1. Sum of the oxidation numbers = the charge on the species. Assign the known ones first (alkali metals +1, H +1, O −2, F −1) and use the stated exceptions.
  2. Solve the sum equation for the unknown.
  3. So S = +4.
  4. So the answer is +4.

Common slip: Using −2 for oxygen in peroxides, superoxides or OF₂, or +1 for hydrogen in metal hydrides.

Question 2

Standard reduction potentials (V, at 25 °C): Cu²⁺/Cu +0.34; F₂/F⁻ +2.87; I₂/I⁻ +0.54; Fe³⁺/Fe²⁺ +0.77. Which is the strongest oxidising agent among the oxidised forms?

  1. Fe³⁺
  2. I₂
  3. Cu²⁺
  4. F₂

Answer: D. F₂

  1. The larger (more positive) the standard reduction potential, the stronger the oxidising agent.
  2. The largest value is 2.87 V for F₂/F⁻.
  3. So the answer is F₂.

Common slip: Picking the most negative value as the strongest oxidant.

Question 3

The unbalanced equation is Cr₂O₇²⁻ + SO₂ → Cr³⁺ + SO₄²⁻ (acidic medium; add H⁺ and H₂O as required). After balancing with the smallest whole-number coefficients, what is the sum of the coefficients of all species on both sides (the coefficient of a species with no number is 1)? Give the answer to the nearest integer.

  1. 14
  2. 11
  3. 10
  4. 12

Answer: D. 12

  1. The balanced equation is Cr₂O₇²⁻ + 3SO₂ + 2H⁺ → 2Cr³⁺ + 3SO₄²⁻ + H₂O.
  2. Sum of coefficients = 1 + 3 + 2 + 2 + 3 + 1 = 12.
  3. So the answer is 12.

Common slip: Leaving out H₂O or H⁺ when adding the coefficients.

More Chemistry chapters

Start a free test