SATJEE ExamsAll chapters

Physics

Thermodynamics: JEE Main practice questions and key rules

Revise the main rules of Thermodynamics, study 3 worked questions, then test yourself with 10 fresh questions. Every question on SATJEE has full steps and the slip to avoid.

Open the revision cardsTake a chapter test

Key rules

  1. ΔU = Q − W_by-gas.
    Watch out: Adding the work when the gas does work.
  2. W = nRT ln(V₂/V₁) for an isothermal ideal-gas process; ΔU = 0.
    Watch out: Using PΔV as if the pressure were constant.
  3. At constant pressure Q : ΔU : W = (f+2) : f : 2.
    Watch out: Assuming all the heat becomes work or all becomes internal energy.
  4. TV^(γ−1) = const for a reversible adiabatic process.
    Watch out: Using the isothermal relation (T unchanged) or exponent γ instead of γ − 1.
  5. η = 1 − T_sink/T_source, with absolute temperatures.
    Watch out: Using Celsius temperatures in the efficiency formula.
  6. ΔU = nC_vΔT for an ideal gas, whatever the path.
    Watch out: Using C_p when the pressure is constant.
  7. η = W/Q₁ and Q₂ = Q₁ − W.
    Watch out: Dividing by Q₂ instead of Q₁.
  8. η = 1 − T_cold/T_hot, always below 100%.
    Watch out: Using T_cold/T_hot, which is the left-over, not the work done.

Worked questions

Question 1

1 mol of a monatomic ideal gas is heated from 200 K to 400 K by some complicated process. Taking R = 8.314 J mol⁻¹ K⁻¹, what is the change in its internal energy?

  1. 4990 J
  2. 1660 J
  3. 4160 J
  4. 2490 J

Answer: D. 2490 J

  1. For an ideal gas U depends only on temperature, so ΔU = nC_vΔT for any process.
  2. C_v = 3R/2, ΔT = 200 K.
  3. ΔU = 1×1.5×8.314×200 = 2490 J.
  4. So the answer is 2490 J.

Common slip: Using C_p when the pressure is constant.

Question 2

A gas absorbs 250 J of heat from its surroundings while it has 150 J of work done on it by the surroundings. What is the change in its internal energy?

  1. 250 J
  2. −400 J
  3. 100 J
  4. 400 J

Answer: D. 400 J

  1. First law: Q = ΔU + W, with Q positive when heat enters the gas and W positive when the gas does work.
  2. Q = 250 J and W = -150 J (work done by the gas).
  3. ΔU = Q − W = 400 J.
  4. So the answer is 400 J.

Common slip: Adding the work when the gas does work.

Question 3

A monatomic ideal gas in a rigid 2 L container is cooled until its pressure falls from 400 kPa to 100 kPa. How much heat does it lose?

  1. 9 × 10⁵ J
  2. 1500 J
  3. 900 J
  4. 600 J

Answer: C. 900 J

  1. Rigid container: V is constant, so Q = nC_vΔT = (f/2)nRΔT = (f/2)VΔP (since nRT = PV).
  2. V = 2×10⁻³ m³, ΔP = 300×10³ Pa.
  3. |Q| = 1.5×2×10⁻³×300×10³ = 900 J.
  4. So the answer is 900 J.

Common slip: Using C_p, or forgetting that kPa × L = J.

More Physics chapters

Start a free test