Physics
Work and energy: JEE Main practice questions and key rules
Revise the main rules of Work and energy, study 3 worked questions, then test yourself with 10 fresh questions. Every question on SATJEE has full steps and the slip to avoid.
Open the revision cardsTake a chapter test
Key rules
- Only the component of the force along the displacement does work.
Watch out: Using sin θ (the perpendicular component) or ignoring the angle. - KE = ½ m v². The speed is squared, not the mass.
Watch out: Forgetting to square v, or forgetting the ½. - W = F d cosθ. A force at 90° to the motion does no work.
Watch out: Ignoring the angle and using W = F × d every time. - Work–energy theorem: net work = ΔKE.
Watch out: Dropping the factor 2. - Work = ½k(x₂² − x₁²); it is not ½k(Δx)².
Watch out: Using ½k(x₂ − x₁)². - P = Fv; at constant speed F = mg.
Watch out: Using hp conversion in the wrong direction or forgetting g. - Input power = useful power ÷ efficiency.
Watch out: Multiplying by the efficiency instead of dividing. - Equilibrium extension mg/k; maximum extension (released from the natural length) 2mg/k.
Watch out: Confusing the equilibrium extension with the maximum extension.
Worked questions
Question 1
A 4 kg ball moves at 10 m/s. What is its kinetic energy?
- 400 J
- 40 J
- 200 J
- 20 J
Answer: C. 200 J
- Kinetic energy = ½ m v².
- = ½ × 4 × 10² = ½ × 4 × 100
- = 200 J.
- So the answer is 200 J.
Common slip: Forgetting to square v, or forgetting the ½.
Question 2
A simple pendulum of length 2.5 m is pulled aside until the string makes 45° with the vertical and then released from rest (cos 45° = 0.707). Taking g = 10 m/s², what is the speed of the bob at the lowest point?
- 3.83 m/s
- 5.95 m/s
- 14.6 m/s
- 2.71 m/s
Answer: A. 3.83 m/s
- The bob falls a height h = L(1 − cos θ).
- mgh = ½mv² gives v = √(2gL(1 − cosθ)).
- v = √(2×10×2.5×(1 − 0.707)) = 3.83 m/s.
- So the answer is 3.83 m/s.
Common slip: Using h = L cosθ or L sinθ.
Question 3
A pump raises 18 m³ of water (density 1000 kg/m³) every minute through a vertical height of 45 m. Taking g = 10 m/s² and an efficiency of 60%, what electrical power must it draw?
- 135 kW
- 81 kW
- 8100 kW
- 225 kW
Answer: D. 225 kW
- Useful power = mgh/t = 1000×18×10×45/60 = 1.35 × 10⁵ W.
- Input power = useful ÷ efficiency = 1.35 × 10⁵/0.6
- = 2.25 × 10⁵ W = 225 kW.
- So the answer is 225 kW.
Common slip: Multiplying by the efficiency instead of dividing.
More Physics chapters
Start a free test